 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
The XLS gauges are programmed with a dedicated software and are completed with a display unit and a remote control: using such a measuring “system” you can monitor the diameter on-line, measuring fast moving products very accurately, to achieve 100% check and to avoid any dimensional non-conformity. |
Use the Xactum Intelligent Laser Micrometers as on-line diameter gauges, in the Xploreline configuration: with no other instrument can you measure diameters so quickly, so accuratley and so easily. 
 |
It measures the diameter and the position of the product in the measuring field |
|
It monitors the average diameter and at the same time it detects short diameter flaws |
|
It records the max and min diameter over a programmable length, to allow checking of shaped products ( i.e corrugated tube ) |
|
The exclusive Blistbuster Software detects repetitive flaws or Blisters ( dual axis systems only ) |
|
It counts meters to get the product length |
|
Out of tolerance alarm outputs |
|
Ready for networking |
Dual Axis Systems |
|
;) |
XPLORELINE.XY13 |
;) |
XPLORELINE.XY35 |
For additional details, please check the |
|
|
Two instruments in one: diameter controller and flaw detector |
|
No scrap: the real time inspection allows the system to detect out-of-tolerance trends and return the product back within specification, avoiding any risk of rejects or complaints. |
|
Saving in materials: by keeping the product close to the lowest tolerance limit, considerable savings in materials can be achieved, thus allowing the cost of the system to be paid back in just a few months. |
|
Process automation: it will be possible to use machines with automatic change of collection-reels or systems to coil spools up to a pre-set weight. |
|
More competitive products: the dual axis gauge allows accurate inspection of the cross-sectional area of the wire, in spite of its random orientation. Product quality will be improved when the performance of the wire depends upon its cross-section area (i.e. tensile strength, electrical conductivity, etc.) |
|
Quality Certification: the 100% inspection makes random sample checks redundant and allows the printing of detailed reports to prove product quality. |
|
Competitive price: the favourable cost/benefits ratio ensures a short pay back time. |
|
XPLORELINE really works on-line: fitting the gauge on wet drawing machines, it has proved to be successful where many other equipments have failed. |
|
It is really insensitive to product vibration: just try it! |
|
Excellent resistence to dust: over than 30 day of uninterrupted operation are guaranteed on dry drawing benches even in most critical applications. |
|
Multiple-color display: the display color shows immediately the tolerance status of the part |
|
IR Remote Control: easy to program using a simple remote control |
|
Efficient Glass Logic: no problem when EXTRULINE is measuring glass pipes and medical tubing, as the high performance software developed by Aeroel assures reliable gauging of transparent products. |
|
Permanent self-calibration: measuring accuracy is guaranteed over time and periodical re-mastering is no longer required. |
|
Ready for networking: a lot of Systems can be connected to a PC through an Ethernet line. |
|
3 years guarantee: the high standards of components and the solid state laser source warrant long operational life. |
|
Know-how and service: Aeroel provides qualified and efficient technical service, thanks to their experience in applying laser technology in the Wire Industry. |
|
Made in Europe: XPLORELINE complies with the high quality and safety standards set by the European Union. |
 |
 |
 |
 |
 |
For
further informations or quotations, fill our Information Request Form in Contacts section. |
 |
AEROEL SRL Via Pier Paolo Pasolini, 35/3 Pradamano (Ud) 33040 ITALY Tel. +39 0432671301 Fax +39 0432671543 E-mail: aeroel@aeroel.it |
 |