Industria Meccanica - Table-Gauge

Use the Xactum Intelligent Laser Gauges as bench-top micrometers, in the Table-Gauge configuration: with no other instrument can you measure diameters so quickly, so accurately and so easily.

The XLS gauges are programmed with a dedicated software and are completed with a display unit, a remote control, fixturing to hold the part and a base-plate for bench-top use: using this “Table-Gauge” assembly you can, in a few seconds, check the diameter, roundness and the concentricity of ground or turned parts, to an accuracy that before only could be obtained in a metrology room, by using much more expensive equipment and specialized personnel.

	It measures the diameter and the ovality of the part
	It also measures the center position and the section concentricity
	It checks the pre-set tolerances
	It sends the measured data to a PC, through the RS232 or Ethernet link

Single Axis Systems: ideal to check pins (masters) or any other ground or turned part
	TABLE-GAUGE.X40 Measuring Field: 40 mm Measurable Diameters: from 0,06 to 38 mm Repeatability: up to ± 0,1 µm Price: ask for best quotation
	TABLE-GAUGE.X80 Measuring Field: 80 mm Measurable Diameters: from 0,75 to 78 mm Repeatability:up to± 0.3 µm Price: ask for best quotation

For additional details, please check the TABLE-GAUGE.X System datasheet (pdf - 860 kB)

Dual Axis Systems: ideal to check drawn wire or dies, magnet wire, optical fibers or extruded products
	TABLE-GAUGE.XY13 Measuring Field:13 x 13 mm Measurable Diameters: from 0,03 to 10 mm Repeatability:up to ± 0,03 µm Price: ask for best quotation
	TABLE-GAUGE.XY35 Measuring Field: 35 x 35 mm Measurable Diameters: from 0,2 to 32 mm Repeatability:up to ±0,2 µm Price: ask for best quotation

For additional details, please check the TABLE-GAUGE.XY System datasheet (pdf - 860 kB)

	Ultra accurate measurement and repeatable results up to 0,03 µm, thanks to our top-level laser technology offered at very competitive conditions
	Objective and repeatable results: high gauging accuracy is obtained regardless of skill or experience of operators.
	Saving of skilled labour: being quick and simple to use, MECLAB drastically reduces inspection time while improving measurement capability.
	Quality certification: measurement data are immediately printed and recorded for further analysis; you will no longer need to fill the time-wasting, handwritten control charts.

	Miglior rapporto costo/performance : soluzione a basso costo per misure di qualità “metrologica”
	Very high precision: a patented self-calibration device guarantees permanent gauge accuracy, with no re-mastering required.
	It is insensitive to changes in the ambient temperature: the self-calibration device automatically compensates any drift due to room temperature changes, making the Meclab ideally suited for use in the workshop.
	Very quick and easy to use: in a few seconds you will measure the diameter of your parts
	Multiple-color display: the display color shows immediately the tolerance status of the part
	IR Remote Control: easy to program using a simple remote control
	3 years guarantee: the high standards of components and the solid state laser source warrant long operational life.
	Know-how and service: Aeroel provides qualified and efficient technical service, thanks to their experience in applying laser technology in Mechanical Industry.
	Made in Europe: MECLAB complies with the high quality and safety standards set by the European Union.

For further informations or quotations, fill our
Information Request Form in Contacts section.

AEROEL SRL
Via Pier Paolo Pasolini, 35/3
Pradamano (Ud)
33040 ITALY
Tel. +39 0432671301
Fax +39 0432671543
E-mail: aeroel@aeroel.it